gohantee Propane Orifice Connector 3/8\”x1/8\” review

Have you ever wondered whether a small brass orifice connector can make a big difference to your outdoor cooking setup?

Some suggestions to consider!

 

This image is property of Amazon.com.

Product Overview

The gohantee Propane Orifice Connector Brass Tube Fitting 3/8″ Flare x 1/8″ Mnpt for Freestanding Casting Cooking Stove Grill Turkey Pot Cooker 2PCS is a compact replacement part designed for propane-fired cookers. You’ll find it useful if you own a turkey pot cooker, cast iron cooker stove, or a similar freestanding gas appliance that uses 3/8″ flare connections and 1/8″ NPT orifice fittings.

What this product is

This is a set of two brass propane orifice connectors that adapt a 3/8″ flare male thread to a 1/8″ male NPT orifice thread, including the jet orifice necessary for controlled gas flow. If your original orifice or fitting is worn, corroded, or you need a spare, this is a ready-made replacement.

Who it’s aimed at

This product targets people who cook outdoors with turkey fryers, cast iron stoves, or portable grills that match the specified thread sizes—especially hobbyist cooks, backyard chefs, and tailgaters. If you maintain or repair gas cookers, having these on hand is practical and reassuring.

Key Features

You’ll want to know the most important attributes before you install or replace an orifice, and these features make the product easy to evaluate.

Compatibility

These orifice connectors are built for turkey pot cookers and cast iron cooker stoves that use a 3/8″ flare connection paired with a 1/8″ NPT orifice thread. You should check your appliance manual or the threads on your current fittings to confirm compatibility before purchasing.

Thread Sizes

The threads are specified as 3/8″ flare MNPT x 1/8″ MNPT. This means the connector accepts a 3/8″ flare connection on one side and provides a 1/8″ NPT male thread on the orifice side. If you’re unsure about thread terminology, you should physically compare to your existing connector or take a picture and match measurements.

Material Quality

These fittings are made of brass, which gives you resistance to corrosion and good ductility at elevated temperatures. Brass also has low magnetic permeability and long-term durability in propane environments, so you’ll likely get a solid lifespan with proper care.

Restrictions and Safety Note

This product is designed for gas appliances only and is not suitable for potable water systems. If you plan to use it in any application other than propane/LP gas flow, you should not use it.

Warranty and Support

The seller offers a service warranty and customer support; they say they’ll reply within 24 hours if you have questions about the 3/8″ flare to 1/8″ orifice. You should contact them with any fitment or performance questions to ensure proper use and potential returns or replacements.

Product Specifications (Quick Reference Table)

Below is a concise breakdown to help you match the part to your system quickly.

Specification	Detail
Product Name	gohantee Propane Orifice Connector Brass Tube Fitting 3/8″ Flare x 1/8″ Mnpt for Freestanding Casting Cooking Stove Grill Turkey Pot Cooker 2PCS
Quantity	2 pieces
Input Thread	3/8″ flare male
Output Thread	1/8″ NPT male (orifice side)
Material	Brass
Primary Use	Propane turkey pot cooker / cast iron cooker stove / grills
Compatibility	Gasone and similar brand cookers (check threads)
Not for	Potable water appliances
Support	Seller replies within 24 hours (warranty/service)

What’s in the Box

You’ll receive two brass orifice connectors, each with the 3/8″ flare male thread on one end and the 1/8″ NPT male orifice thread on the other. There are no additional gaskets, washers, or hoses included in the standard package.

Packaging and labeling

The parts typically come in a small box or plastic bag with a label or sticker that identifies thread sizes and quantity. You should verify what’s inside before installation and make sure both pieces are present and undamaged.

Installation and Setup

Installing an orifice connector is straightforward if you have basic hand tools, but you should follow safe gas-handling practices.

Tools you’ll need

You’ll want an adjustable wrench or two appropriately sized wrenches, some thread sealant or propane-rated tape if recommended by your appliance manual, and a soap-and-water solution to check for leaks. If you’re not comfortable working on gas fittings, you should contact a qualified technician.

Step-by-step installation

• Turn off the propane tank and disconnect the regulator to make sure no gas is flowing.
• Remove the existing orifice or connector by holding the mating fitting steady and turning the connector counterclockwise with a wrench.
• Clean the threads of any debris, old tape, or sealant.
• If your appliance manual recommends a thread sealant, use a propane-rated tape or approved sealant sparingly on the male NPT threads; do not apply to flare seating surfaces.
• Thread the new gohantee connector into place by hand, then snug with a wrench—do not overtighten to avoid damaging threads or deforming the flare.
• Reconnect the regulator and slowly turn on the propane supply.
• Use a soap-and-water solution to check all connections for bubbles which indicate leaks; turn everything off if you detect a leak and retighten or reseal.

Common mistakes to avoid

You should avoid overtightening flare fittings (which need a proper seating contact) and avoid applying tape on flare surfaces. Also, don’t assume all 3/8″ fittings are identical—thread type matters, so a physical check is important.

Performance and Real-World Use

You’ll want to know how these fittings perform during actual cooking scenarios and whether they’re worth keeping as spares.

Flow and flame characteristics

The orifice size and design control gas flow to your burner, so using a properly sized 1/8″ NPT orifice should maintain consistent flame behavior for which the appliance was designed. You should see stable blue flames without significant flicker or yellow tipping if the orifice and rest of the system are clean and functioning.

High-temperature durability

Because these connectors are brass, you should expect reliable performance at the temperatures typical for outdoor propane burners and turkey fryers. If your stove or grill routinely exposes fittings to extremely high radiant heat (for example, prolonged searing near the fitting), you should position connectors accordingly or use heat shields.

Corrosion resistance

Brass resists corrosion better than many base metals, so you’ll find these fittings perform well in varied outdoor conditions. Still, you should protect them from direct saltwater exposure and store spares in a dry place to maximize service life.

This image is property of Amazon.com.

Use Cases and Compatibility Scenarios

Understanding specific situations where these connectors shine will help you decide whether they fit your needs.

Turkey pot cookers

If you use a turkey pot cooker, you’ll find these orifice connectors are typically compatible with the gas valve systems that use 3/8″ flare to 1/8″ orifice threads. You should get consistent burner performance and an easy replacement if your original orifice is clogged or damaged.

Cast iron cooker stoves

For cast iron freestanding stoves, these connectors provide the correct thread adaptation and the durable brass body that can handle the rigors of heavy outdoor cooking. You should ensure the rest of your line (regulators, hoses) matches the same thread types.

Grills and portable burners

If your grill or portable burner accepts a similar thread combination, these can act as a spare part or quick fix if the original orifice becomes compromised. You should still check manufacturer specifications for jet sizes and recommended fittings.

Pros and Cons

You deserve a clear summary of advantages and potential drawbacks before you buy or use these fittings.

Pros

• You get two connectors for redundancy or multiple appliances.
• Brass construction provides good corrosion resistance and durability.
• Compatible with common turkey cookers and cast iron stoves that use 3/8″ flare to 1/8″ NPT orifice connections.
• Simple installation for anyone comfortable with basic gas appliance maintenance.
• Reasonable cost for a direct replacement part.

Cons

• Not suitable for potable water or plumbing systems—gas-only use.
• No additional accessories (gaskets, washers) included; you may need to provide sealant per appliance instructions.
• Fitment depends on matching thread type exactly; not every 3/8″ fitting is a flare.
• Limited to the specified thread sizes; if you need a different size or left-hand thread, these won’t work.

Troubleshooting Tips

If something goes wrong after installation, you can usually diagnose and fix common issues without professional help.

If you detect a gas leak

Turn off the gas immediately and tighten connections gently. If the leak persists after a careful retightening and resealing, disconnect the part and inspect thread damage or cross-threading. Replace the connector if threads are stripped.

If flames look weak or yellow

Check for a clogged orifice—debris, insect nests, or residue can restrict propane flow. Remove the orifice (only when gas is off), inspect visually and with compressed air, and replace if damaged. Also verify regulator and hose conditions for consistent pressure.

If the connector won’t thread in smoothly

Stop and inspect the thread types to ensure you’re using a matching 3/8″ flare and 1/8″ NPT. Cross-threading or wrong-thread combinations can strip threads quickly. Don’t force it—this prevents long-term damage.

Maintenance and Care

A little routine maintenance can extend the life of these fittings and keep your cooker running safely.

Cleaning

Wipe external surfaces with a mild detergent and water; avoid harsh chemicals that can damage brass. If residue forms inside the orifice, you can clean gently with a soft brush, compressed air, or replace the orifice if clogging persists.

Storage

You should store spare connectors in a dry, cool place and ideally wrapped to prevent dust and moisture from settling in threads. Keep them away from corrosive chemicals and salt spray.

Periodic inspection

Before every season or heavy use, check all gas connections for wear, corrosion, or thread damage. Replacing a small brass fitting preemptively is inexpensive compared to dealing with an unexpected failure mid-cook.

Safety Considerations

Working with propane requires attention to detail and adherence to safety procedures to protect you, your family, and property.

Work only with gas off

Always turn off and depressurize your gas system before you touch fittings or remove old hardware. This prevents accidental leaks and fire hazards.

Use approved sealants

If your appliance manual recommends thread sealant for NPT threads, use only propane-approved or certified sealants or tapes. Do not apply sealant to flare surfaces, which rely on metal-to-metal sealing.

Check for leaks

After installation, always test with a soap-and-water solution at room temperature. Never use an open flame to check for leaks.

Get professional help if unsure

If you’re uncertain about threading types or notice significant thread damage, consult a qualified technician or manufacturer support before proceeding.

Comparison with Alternatives

You might consider other options if you’re shopping for orifice connectors, so here’s how this product stacks up.

Brass vs. stainless steel

Brass is common for gas connectors due to ease of machineability and corrosion resistance in typical environments. Stainless steel can offer higher strength and chemistry resistance in aggressive environments, but it’s often more expensive and not always necessary for propane fittings used outdoors.

Pre-packaged kits vs. single parts

Some kits include additional adapters, gaskets, and multiple orifice sizes for tuning burner output. If you want to fine-tune BTU output or use the connector across differing appliances, a kit might be better. This gohantee product is focused on direct replacement and convenience with two identical pieces.

OEM vs. aftermarket

OEM parts from your appliance manufacturer often match exactly and may be guaranteed to maintain warranty conditions. Aftermarket parts like this one are usually more affordable and compatible with many brands (Gasone, etc.), but you should double-check to be sure they won’t void any warranty.

Price and Value

You’ll appreciate that small parts like these are inexpensive compared to major appliances or regulator replacements.

Cost-effectiveness

Buying two connectors gives you a spare for the price of one, which is useful for backup or simultaneous repairs. If you rely on your cooker frequently, this is a low-cost insurance policy to keep you cooking.

Longevity vs. cost

Given the material and simplicity, these connectors should outlast many cheap alternatives and justify their price through reduced downtime and easier maintenance.

Who Should Buy This

This product suits several buyer profiles, which helps you decide if it fits your needs.

Casual backyard chefs

If you cook outdoors a few times a season and want a spare or replacement orifice, you’ll find these affordable and easy to install.

Frequent users and vendors

If you run a small food stall, catering business, or frequently fry turkeys or use cast iron stoves, these connectors are good to keep as spares for quick field repairs.

DIY maintainers

If you enjoy maintaining your own appliances and want to avoid service calls for small fixes, keeping a pair on hand provides convenience and reliability.

Frequently Asked Questions (FAQ)

You might have a few practical questions before you commit, and these answers should help.

Can I use these for natural gas?

These are designed for propane (LP) systems and orifice sizing can differ between propane and natural gas. You should check your appliance requirements—do not assume interchangeability.

Do I need any additional parts?

Often, no additional parts are necessary if your system matches thread types. If your appliance manual recommends a sealant for NPT threads, purchase a propane-rated tape or sealant separately.

Will these fit GasOne cookers?

The product listing indicates compatibility with GasOne and similar brands, but you should verify thread types on your specific model before installing.

Are these safe for high-BTU burners?

They’re intended for typical propane burners used in turkey fryers and cast iron stoves. If you operate unusually high-BTU or high-temperature systems, consider checking appliance specs or consulting support.

Final Verdict

If you need a straightforward, durable, and affordable replacement for a 3/8″ flare to 1/8″ NPT propane orifice, you’ll find the gohantee Propane Orifice Connector Brass Tube Fitting 3/8″ Flare x 1/8″ Mnpt for Freestanding Casting Cooking Stove Grill Turkey Pot Cooker 2PCS to be a sensible choice. You should like the brass construction, the convenience of two pieces, and the compatibility with common outdoor propane appliances. As long as you confirm thread compatibility and follow safe installation practices, this fitting will likely serve as a reliable part in your outdoor cooking toolkit.

If you want, tell me which appliance or model you have and I’ll help you confirm whether this connector is a match for your system.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.